furnace i have a coleman 7900 series standing pilot model, and the a/c won't click off when it should, it just keeps running...i dont know how mobile home furnaces work.... it only has two wires going
...furnace is gas forced air and is in a cold attic. fuanace may be oversized and is short cycling it heats up house to fast it is better when they run longer older style thermostats have a heat ...
Question about Electronic Programmable Heat/Cool Thermostat - CT3300A100 Heater
...furnace will not turn off. The temp in the house might get up to 75, still running. I turn it off by cycling the thermostat up to 75 and back down to 70 again. I'm baffled that cycling the power ...
Question about Electronic Programmable Heat/Cool Thermostat - CT3300A100 Heater
...thermostat 9600 Robertshaw and I have to use the trip switch to start my furnace. Then it reaches the temperature and sometimes it will kick in by itself but majority of the time I have to trip it. I ...
Question about CT3600 7 Day Electronic Programmable Thermostat Heater
thermostat, the furnace kicks on at after it drops 1 degree this cant be right Yes this is probably correct the newer thermostats will kick on with a 1 degree temerature drop. This is better since the
Question about CT3600 7 Day Electronic Programmable Thermostat Heater
...furnace will run until it reaches temperature then kick off like normal, however in order to get it to turn back on I have to kick it low. What could this be? Sounds like the Thermostat isn't ...
...furnace kicks on, runs a little while, kicks off, then kicks on again until desired temperature is reached it could be the thermostat on the wall not working or the fan control is not working as it ...
Question about Fan Company 5/1/1 Programmable Thermostat
...the heat will come back on and repeat the same issue. usually this is a bad thermostat, no signal to furnace. have a great day!! if not the furnace its the thermostat not turning furnace blower
Question about Fan Company 5/1/1 Programmable Thermostat
...is if it runs it is a bad thermostat, if it does not run it is in the furnace control. Can be a stuck relay or bad board in the furnace, this is the easiest way to check the thermostat that I know
...thermostat or furnace? Help SHUT THE POWER OFF TO THE FURNACE, REMOVE THE THERMOSTAT FROM THE THERMOSTAT SUB BASE TAKE THE WIRE THAT IS ON THE R TERMINAL AND THE WIRE THAT IS ON THE W TERMINAL AND ...
Usually answered in minutes!
2,517 Questions
1,056 Questions
713 Questions
416 Questions
354 Questions