Questions & Answers for: fuel tap reserve position

Fuel tap position for 1994 GSXR 750 I have recently bought a 1994 GSXR 750 and dont know what position the fuel tap should be for ON, RESERVE or PRIME. down for on, forward for reserve, backwards for ...

...fuel tap itself. It has three positions, on , off and reserve. In the on position your fuel tap will be able to drink about 90% of your fuel tank and then it wont be able to drain anymore, then you ...

...fuel tap? no markings. Usually the fuel valve is this Straight Down = ON Straight Up = RESERVE Horizontal/Across = OFF There may be some difference with the manufacturers, or with custom fuel valves ...

...fuel tap face for normal tank compared to reserve? my fuel tap is long at one end and short at the other but which end is normal for fuel? Start with the fuel tap (called a petcock) in the horizontal ...

the tank dry without the reserve kicking in to action. when the tap is in the down position it will only use fuel up to the reserve and you will need to turn the tap up to put it onto the reserve fuel

...tap on / reserve position Hi, Andrewjoh128 your fuel valve positions are as follows with the long end of the lever pointing: 1. Forward=off 2. Down=on 3. Up=reserve For more information about your ...

...fuel tap on my 600 thundrcat 2000 Hi, 3papag the answer is yes for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, ...

...fuel tap, prime is the by-pass that allows fuel to flow through without the engine running. On and reserve will only allow fuel to pass when the engine is running (uses vacuum from the carb). PRIME ...

...tap, but be prepared for fuel to come out. If it does, then the tap is set in the prime position so move it to another setting to stop it. If it doesn't start flowing then the tap is set to main or ...

Does the 1996 cbr 900 have a reserve setting on the fuel tap if the tap is a 3 position tap one position will be reserve