Questions & Answers for: fuel pressure 2010 chevy

...pressure switch? Where are they located? I see people saying by the distributor but I located mine by spark plug #1 ...

...fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.   To confirm the problem, the ...

chevy traverse ltz code p0451 Is the vehicle safe to drive? That code is for the Fuel Tank Pressure Sensor. It's safe to drive, but you definitely want to get it fixed sooner than later.

...fuel pressure for fuel injectors to function properly. Have the fuel pressure checked. See that the fuel pressure is within specification for that vehicle. If not, fuel filter, or fuel pump need ...

...And that is a considerable amount of fuel. And it would account for the hard start because there isn't any fuel being pumped into the other injectors until the pump builds the pressure back

...fuel pump , pressure reg., plugs and fuel filter. Hard to start but runs fine for awhile then starts acting up. 2002 Chevy Tahoe + P0171/P0174 - Chevrolet Forum - Chevy ... chevroletforum.com > ... > ...

...fuel pressure is concerned. These are known for fuel pressure regulators leaking an losing fuel pressure . You would need to take intake manifold off to get at it ...

...EQUINOX LS 2.4 MOTOR Where is the EVAP ONTROL CIRCUIT ON 2010 ????? Which part ? Purge solenoid , vent solenoid , fuel tank pressure sensor etc... Your best bet , take it to a qualified repair

...the fuel that may damage the fuel injection system. The filter housing is made to withstand maximum fuel system pressure, exposure to fuel additives, and changes in temperature. inside the gas tank

...fuel pressure, failure in sensors, ECM, anything. You have to diagnose first and then fix. Or check for badfuse or relay..even worn wiring. Coil&ignition module cud hav problms. Are u gittn fuel from ...