Questions & Answers for: fuel effect fires manuals

Question about 2001 Sonoma Extended Cab

6 Answers

...Effect Switch working? No computer codes? All fuse boxes Ko OK ? No accesory alarm system jamming ignition? Spray ether -starting fluid- at induction air filter. Start engine. If it run, is a fuel - ...

Ad

...fires fore a few seconds then stops,as if the fuel pumps aernt running.normally you can hear the front pump but not now so ive changed this and no change,if you push the air intake flap down the ...

Ad

Question about 1990 Cherokee Limited

1 Answer

Our 1990 Jeep Cherokee Laredo was sitting for a year and know it sputters really bad we have put in fuel injection cleaner but we thing the guy we bought it from may have crossed the plug wires when ...

effect on the hunting and surging however at higher throttle setting, the backfires seem to be more often. I don't have a manual on the engine (and it seems impossible to find any documentation online

Question about 1988 Ranger

2 Answers

...fuel filter and the truck fired right up. Drove about a mile and it died. Towed the truck back home and started troubleshooting again. This time I didn't have spark. I have since changed the TFI ...

Question about GBW30P Encl Diesel Genset w/Perkins Eng

1 Answer

...(Make sure to reconnect each one if it had no effect on the fuel solenoid) Once you isolate which circuit it is in then you can chase wires or change the bad switch. Thanks for choosing FixYa. ...

...Effect Sensor,in the distributor,(used for injector timing), it takes the ground off it. Then you got what you have. Once running,the map sensor and coolant temp sensor,play additional rolls in fuel ...

Question about 2004 Royal Star Venture

1 Answer

...fuel back in to keep the engine running. The owner's manual recommends 20W-40 in that temperature range. DO NOT USE ANY OIL MARKED "ENERGY CONSERVING", it contains molybdenum disulfide (a friction ...

fuel pressure at shrader valve has spark at plugs only code was po340 help P0340 - Camshaft Position (CMP) Sensor Circuit Malfunction ,did you check the wiring ? P0340 - Camshaft Position (CMP) Sensor

...fuel shut off or something to that effect. You may have to reach above or behind this panel and push the reset button.The next place to look would be your owner's manual. Another thing to consider is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...