Questions & Answers for: frymaster fryer parts

Frymaster FM345EBLCSD Alarm Is there a way to program whether or not the alarm will sound when product is done cooking? We have three wells in our fryer and the alarm only sounds on one. I would like ...

Frymaster fryer over heats. Replaced thermostat. Runs for a couple of hours then overheats again. Make sure the t'stat is located properly. If it is too low in the vat, it will not read correctly. At ...

Dean gas deep fryer m# SR142GN heats up to temp then whole thing shutts off have to wait about three minutes to turn pilot back on Thermocouple is getting weak. Replace the thermocouple with a new ...

thermostat temperature control thermostat out of order. where can Iget the part? By e-mailing me with M3 & S# at capt_rick1912@yahoo. I would be able to get that right out to you. captrick go ...

frymaster gf14sd and when turned on for about 20 minutes the fryer turns off and pilot light goes out and will not restart til it cools down . First you will need to determine what the oil temperature

...Frymaster electric fryer. When unit is turned on the right display shows "prob" and it beeps Hi, There is a problem in the system. The problem is usually a sensor that is not reading ...

filter pump motor sparks when turned on. Trying to fnd a part number. Frymaster model FB235SD ; series AR WH-90 ; serial# 9811FE0025. Looks like the part number for the pump motor only is 826-1712.

Fryer will not reach the temperature setting and/or runs erratically. 1. Incorrect location of sensor probe or defective temperature sensor. I need a part number for the temperature sensor. Call ...

...frymaster sr42where can i get a pilot assembley We can order parts for your fryer, but do you have a serial number too?It's alot easier to order correct parts with the model and serial ...

I have an Frymaster MJ35, and it will shoot flame out the flue, been told that it could be the safety control valve. It's a pretty expensive part. Are there other possibilities? Seems to happen when ...