Questions & Answers for: frozen shaft

Cord is frozen and tiller won't start The string that starts my Mantis tiller is "frozen". What can I do to "unfreeze" the line and start the machine? take pull rope cover off and oil the clutch that ...

Ad

frozen onto shaft. replaced bolt and left loose tapped bolt head with drift as agitator was lifted without success Had to cut agitator away leaving metal boss exposed will now use a puller to pull off

Ad

Question about THREADED SHAFT UP RATED - 1.00 HP - EB228

1 Answer

hand. Disconnect electric first. If the shaft turns, it's an electrical problem. If the shaft does not or is hard to turn, rust has frozen the shaft in place and the pump will not run. Buy a new motor

Question about 30 Cubic Centimeter Curved Shaft Gas Trimmer

1 Answer

...shaft cable or a frozen bearing in the shaft head...this will necessitate removal of the head and replacement of either the shaft cable or the machine head...if all is working then check the shaft ...

Question about M880 MultiMix Hand Mixer

1 Answer

...shaft in the top that turns the blade is frozen. I don't see that part anywhere online. Bob HI.This steps might be as well helpful.let me just clarify that you can't even manually twist the ...

Question about 1982 GL 1100 Gold Wing

1 Answer

frozen in the pivot shaft, use a penetrating oil to loosen the pedal and remove it. Clean the rust off grease the shaft and put the lever back on. If the piston is frozen in the master cylinder of the

...plugs put more oil an gas in it put that heep stuff in it to make sure its not a frozen gas line now what batter was ok to?// Crank shaft or cam shaft sensor. Happened to my suby about ten years ...

Question about 794-27 Soft Serve Twin Twist Water Cooled Frozen Ice Cream Machine

1 Answer

drive shaft stuck if you can't get it out thru the barrel then you will need to remove the gear box behind the shaft and push it out that way. you should align the shaft afterwards to not rub also ...

thank u for all the help the rotor was a pull off that for some reason was frozen to the distributor shaft it had to be shattered to get it off. any suggestions as to why it would be frozen? Heat

...frozen or you will burn out the windings and then have nothing. U need to be able to grab the drive shaft with a good set of vise grips and maybe an extension to break the shaft free from the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...