Questions & Answers for: frozen pressure washer

...I have the exact problem. Bought the washer last year, worked fine. when I started it this year, no or little pressure from the wand. Help! sounds like it may have been frozen. Is it leaking

no water pressure force feed the pump with water and check for any leaks, has the machine been frozen?

...valve that might be frozen? Hold the trigger of the pressure nozzle open. Turn on the water . Wait to see water coming out of the pressure wand.Then try and start the engine. They can get air

pressure The washer is leaking from underneath - only used it twice last summer - was in the garage in the winter - could it have frozen? more than likely it has frozen , if you did not disconnect the

...is a spring relief valve that is most likely frozen and not allowing the water pressure from the pump to circulate within itself.They range from 60.00 to 150.00 depending on your make and

...pressure washer would help but I would check the manifold to make sure there are no cracks in the manifold or damaged O-Rings.This time of the year we see many units that had water in them over the ...

...which allows you to circulate a liquid substance which lubricates the pressure pump....the pump could be frozen up... I have a rotating nozzle which I bought...and it had frozen up...this stuff ...

...pressure washer is Campbell Hausfeld PW181000AV 1,800 psi 1.6 gpm Electric Pressure Washer with 25-Foot Hose i assume you put gas and pulled the rope an its running and have water connected and ...

...has developed cracks and water leaks out. What caused this steel housing to crack?? In winter when it has frozen and the pressure washer was in the shed you can assume that this may have been a

...frozen pressure washer pump? after winter storage pumps operates for an instant then stops .Motor runs fine If pressure washer got frozen over the winter, the pump is bad. replace! Use winter pump ...