Questions & Answers for: front sprocket Cars & Trucks

...Sprocket , Front 3 ? 43 Timing Chain/Belt Teeth 4 6306 Crankshaft Sprocket 5 6268 Timing Chain/Belt 6 6256 Camshaft Sprocket , Rear Removal Drain the cooling system. Refer to Section 03-03 for the ...

front crankshaft timing sprocket is held firmly in place and prevent guide damage. Install with the flat side towards the crankshaft sprocket. Remove or disconnect the following: Front 4 oil pan bolts

...front of the engine) right side camshaft sprocket (1 dot on sprocket and the cylinder head); left side camshaft sprocket (1 dot on sprocket and clyinder head); crankshaft sprocket (arrow on the block ...

...front camshaft sprocket timing mark should align with the inner timing belt cover timing mark. If the belt is to be reused, mark the direction of rotation on the belt for installation reference. Mark ...

sprocket. NOTE: The composite type engine front cover and seal must not be reused. Always install a new engine cover with a new seal. Install new engine front cover and bolts. Torque bolts to: 106 in.

...sprocket face front of engine. Position crankshaft so that No. 1 piston is at TDC and crankshaft key is at 12 o'clock. Install slack side timing chain guide and timing chain tension guide. Install ...

...sprocket Disconnect the negative battery cable. Remove the timing chain front cover assembly, as outlined earlier in this section. Rotate the crankshaft until the timing marks on the crankshaft ...

...sprocket mark to the front cover notch. Align the oil pump sprocket diamond to the engine front cover diamond. Align the camshaft sprocket triangle to the engine front cover triangle. Here are the ...

...front. 21. Install idler sprocket shaft. 22. Install the cylinder head assembly. 23. Install all remaining components in reverse order of removal. 24. Connect the negative (-) battery cable. Refill ...

...sprocket and pulley, lower timing chain, front cover assembly, engine mount and front mounting bracket, oil strainer and pan assembly and center crossmember.4 Reattach the upper timing chain, idler ...