Questions & Answers for: front panel fisher paykel dryer

Ad

Question about DEGX1 Electric Dryer

1 Answer

...on control panel, no response from any buttons Try switching off the power to the machine for 5-15 mins and then re-switch power on Had same symptoms with my multi-temp F&P front load dryer. ...

Ad

...front panel off the dryer and instantly smelled that "burnt electronics" smell. Can anyone point me in the right direction to order parts? (or tell me that I'm better off just replacing it?) Thanks a ...

Ad

Question about DEGX1 Electric Dryer

1 Answer

FISHER PAYKEL DRYER MY DRYER IS ABOUT A YEA OLD, AND IT IS NOT HEATING UP. NOT DRYONG MY CLOTHES. there is a reset button located inside the front panel on the dryer. Try pushing it.

Question about DE09 Dryer

1 Answer

...front panel to the cabinet. Take them out and tip the front forward and then pull up. be careful of the door switch wires. if you need a comprehensive service manual for that dryer, it can be found ...

Question about DEGX1 Electric Dryer

1 Answer

...front panel...put your head down by the heater ,see if its coming on an off..do not touch an thing ,make sure not to touch anything...so you dont get shocked...if it is the problem replace the main ...

Question about DEGX1 Electric Dryer

1 Answer

...front panel and pressed the red button...now it will not turn on. After looking at it, there are two plugs that come off of the part that has the red button...one of them is obviously burnt. What is ...

Question about DEGX1 Electric Dryer

1 Answer

We have a loud noise when the dryer turns. Sounds like metal on metal. This is usually the front drum bearings that are mounted to the front panel. Raise the cabinet top to check. Hope this helps!

...front panel. Cannot get the front panel to let loose at the bottom......are there screws there too?? I'm assuming it is either the pulley / belt mechanism or the bearings that need some kind ...

front panel off a fisher paykel dryer to replace the felt seal my F&P front load dryer would not start - it would hum when I pushed the start button. After trial and error taking the top off, then

front panel and use a wooden spoon to activate the button:) Now the start button has gone completely. Is it possible to repair it or is too difficult/ expensive? Dryer isn't in particularly good shape

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

jimorris77

Level 3 Expert

411 Answers

Brad Brown

Level 3 Expert

18139 Answers

Are you a Dryers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...