Question about 51SWX20B 51" Rear Projection Television
Old Projection telvision on the fritz When you first turn on the tv it has full picture then it starts to shrink till a red line, blue line and a green line in the middle of the screen and then screen
hitachi television repair The color convergence seems to be on the fritz. all of the images on the screen have red blue and green shadows around them. I have tried the magic focus system, but it shuts
hitachi television repair The color convergence seems to be on the fritz. all of the images on the screen have red blue and green shadows around them. I have tried the magic focus system, but it shuts
Question about 61SWX10B 61" Rear Projection Television
The color convergence seems to be on the fritz. all of the images on the screen have red blue and green shadows around them. I have tried the magic focus syste Replace the convergence ic's. You will ...
Question about 53FDX01B 53" Rear Projection Television
...seconds. Unplug, wait, re-plug does not fix (re-set) relay? Power serge protection circuit on the fritz? Got any idea's, something I can try without calling home service$$$$$. Thanks for your time ...
Color and Image are Bad! The color convergence seems to be on the fritz. All of the images on the screen have red blue and green shadows around them. It came back to normal for a minute and then went ...
Question about 51F500 51" Rear Projection HDTV-Ready Television
...will not let me adjust it in manual convergence. Please advise! Your convergence board is on the fritz! Try contacting TVRepairKits.com and see if they can help
...its very unsafe. I want it to onlyshoot ONE nail at a time. How can I repair this problem. Thanks, Fritz Most all nail guns can be converted to single fire, however, usually parts must be changed. ...
...repair or just a tube? It's a 50 inch model ux11k You have a power supply board that is on the fritz. If you find a TV tech, have them replace some of the critical capacitors, check the ...
Question about 53SDX01B 53" Rear Projection Television
...It's like seeing double. I don't believe you need to see the eye doctor...yet! Your TV is on the fritz. You need to replace the convergence ICs and check those small ohm 1 watt resistors. You can ...
Usually answered in minutes!
727 Questions
631 Questions
405 Questions
415 Questions
357 Questions