Questions & Answers for: frigidaire oven door locked after power failure

...frigidaire professional series free standing range On this free standing gas range what does "PF" code mean ? "PF" indicates the electronic control detected a Power Failure. This could have been ...

...Door Switch circuits. 4. Unplug P4, apply power (L1) directly to the Lock Motor, if the motor does not rotate, replace Lock Motor Assembly. Plug P4. 5. Check Lock Switch A for proper operation (do ...

frigidaire oven f9 code my frigidaire oven has f9 code and beep and the door will not unlock. What do i do to fix it? Here's the info from the service manual: "Fault Code: F9 Likely Failure ...

...Frigidaire oven and the oven door locks and lock light comes on. It will beep every few minutes when we have the oven on and flashes ''F1''. What is causing this problem and how can I fix it? ...

oven door with an F9 and beeping Here's the info from the service manual "Fault Code: F9 Likely Failure Condition/Cause: 1. Door motor failure / jammed. Latch motor switch failure. 2. Control software

...oven door has completely unlocked. Does the clock display “Sd” or “dddd”? If so, the clock is in sales demo mode. Press and hold the “BAKE TIME” button for 6 seconds to exit sales demo mode. If this ...

...oven door, prevents the warmer drawer and most oven controls from being turned ON. If so, press and hold CLEAR/OFF for 3 seconds. A beep will sound. LOC will clear. The "DOOR LOCKED" will continue to ...

...Frigidaire Professional Series Ceramic top oven into Maxx Clean mode and then the power went out in my house. When it came back on, there's a little red lock symbol on the display and the cooktop ...

...frigidaire gas range model FGF379WECG, the control panel say that my oven door is locked, but the door opens, when I turn on the oven to bake or broil the lock engages and disengages for about 30 ...

...oven Door frigidaire? Usually the door locks during a self cleaning cycle for safety reasons. If the self cleaning cycle did not finish properly (over temp sensor trip, etc.) it could end up with the ...