Ford F150 stalls after ignition if not held at 1000 rpm. probaly got vacum leak on back of intake manifold What can I do to fix this problem? Ford F150 stalls after ignition if not held at 1000 rpm. ...
...ford 302, F150 pickup Motor will not run or stalles out at between 2 to 3 thousand RPM. Runs ok below that. Have had everything check out at a Ford Dealer Ship but they can't slove the problem. Truck ...
Surge and Stall My 98 f150 also stalls when at a stop light or in park. Additionally, though, it will surge intermittently while driving, sometimes causing it to stall while going down the road! Check
My 2000 F150 Has a code of P0320 My 2000 f150 WOULD STALL WHEN i RODE OVER A SPEED BUMP. NOW IT STALLS ON TURNS. THE CHECK ENGINE LIGH HAS FINALLY COME ON.THE CODE IS P0320 check plugs and wires,start
After replacing plugs and wires engin stalls when 1996 4.9 F150? After replacing plugs and wires engin stalls when execrating.Starts and idles fine. double check the spark plugs are tight as well as ...
...ford f150 sometimes after driving it stalls,it does restart with out any problem? it has 19800 miles on it,also the engine idle will get low,happens when you come to a stop thanks Air Idle Solenoid, ...
...ford f150 5.4 triton. the truck stalled out while driving will not start replaced all the plugs the fuel pressure sensor an fuel pump. yet still no fuel pressure Not sure about your truck older Fords ...
...ford-trucks.com > ... > 1987 - 1996 F150 & Larger F-Series Trucks May 22, 2012 - Stalls when put into Drive or Reverse 1987 - 1996 F150 & Larger ... the fluid that was needed...my truck would ...
Question about 2004 F150
Ford f150 V8 why would it be running rough and stalling out sometimes Bought the truck a couple months ago added seafoam to it started pulling code p 0171 and p0174 then started running very rough and
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions