Questions & Answers for: ford explorer ball joint

...ball joint (1994 Explorer 4 Wheel Drive with the Manual Locking Hub.) Ball joints are pressed in. Upper ball joint also has and eccentric to the stud which is not threaded. The lower ball joint has ...

...ford explorer in the front i have 1997 ford explorer and it is squeeking in the front i replaced the shocks but that didnt help what else could it be Does it happen while the drive belt is moving? I ...

how to replace lower and upper ball joints Ford Explorer 1999 The upper ball joints are part of the upper control arms. The upper control arms have to be replaced.

...ball joints on a 2002 explorer sport the lower ball joints have to be pressed into the lower control arms.The upper ball joints are part of the upper control arm so the upper control arms have to be ...

...ford explorer The ball joint on your vehicle is not replacable by itself. The control arm which holds the ball joint must be replaced. The nuts holding the arms on will have a small metal tab. That ...

...ford explorer sport how to change the lower ball joint? support vehicle under A frame remove wheel. loosen nut on top of ball joint.seperate spindle assembly from ball joint w/ball joint seperating ...

...ford explorer (eddie Baurer) did not pass inspection right side is the worst front tires showed wearing tires failed also. My husband is trying to replace he's not a mechanic but a plumber and ...

...bumps on 1999 ford explorer what would cause that? besides ball joints. Ok I have seen a-frame bushings upper and lower make noise, But most likely its shocks if you have had your ball joints

...Ford Explorer and just replaced ball joints on both front sides due to it making a loud squeaking noise when I turn and hit a bump but is still making the noise.... any clues? check your rotors inner ...

...you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." How To Install Upper Control Arm and Ball Joint 2002 05 Ford