Questions & Answers for: forced air propane heater staying

forced air propane heater won't stay lit I get the heater to ignite (Reddy RLP30) but when I release the button after 20 secs it won't stay lit; and I've gone through all of the procedures more than a

won't stay lit when i lite my ready heater rep50 c p gas 50,000 btu it will not stay lit. Try www.reddyparts.com for help Propane Forced Air Heaters ReddyHeater 50,000 BTU unable to keep heater lit...

...forced air/propane. It ignites and as long as I hold the igniter in its fine, but it won't stay lit..... I contacted ReddyParts.com and talked with their support department (866-883-9312). They ...

...LIT? WHEN I PUSH IN THE BUTTON TO LIT THE HEATER GOES OFF AS SOON AS I LET THE BUTTON GO. When holding button in,you are overiding themocouple funtion. You probably need to replace the ...

...heater used at a swap meet. The problem I am having with the unit is when i turn the propane bottle on & plug the unit in & proceed to light the unit in the pilot position.The unit does not stay lit ...

...forced air heater model 30 fsa wont stay lit only stays lit for a few minutes and then wont relite at all if its lit by a pilot your thermocouple is bad the purpose of the thermocouple it to keep the ...

40,000 but will not stay lit Did you clean the flame sensor probe? Take a piece of sandpaper or metal file and clean it. Try that.

...lit if I hold in the propane button Problem is either the thermocouple or the thermoelectric valve. I have one of these as well with the same problem. On mine it is not the thermocouple. I have ...

Forced Air Kerosene Space Heater. And finally, you say "propane torpedo lights but doesn't stay lit." Which is it? To really help you, I'll need the correct manufacturer's name & model number. And

/www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk019mViwcH7XzWSqfLTcR2JQMQz9Og%3A1614104534374&ei=1kc1YNilFquawbkP3IGz8As&q=all+pro+propane+heater+won%27t+stay+lit .