Questions & Answers for: foodsaver hose

Tillia Foodsaver VAC 370 won't stop vaccuming to seal I can't find my manual and it's no longer available now at foodsaver.com, so I'm at a loss for what to do. This Foodsaver has no problem sealing ...

...Hose into the Accessory Port on your FoodSaver® appliance. 6. Insert the other end of the Accessory Hose into the hole on the top of the canister lid. Twist the gray tip of hose while inserting ...

foodsaver pro locked up. 3 green lites blink off and on. is the problem fixable? The reset button is the small black rubber covered hole on the left side of the vacuum channel. If you press down on ...

...Foodsaver by Tillia. It is a few years old, works great still but when I moved, I lost the hose, hose fitting, hood and inside gasket that all go together to seal jars. The new models don't have this ...

no suction to seal bag is a hose unplugged? Unplug the devise and see if you can find anything that looks like it's not connected OR it has a hole in the hose. 

...FoodSaver model V3835. The unit that rewinds the hose when you slightly tug on it after you have finished using it stopped working. I took the screws off on the bottom plate, thinking it would be an ...

MY FOOD SAVER HAS BEGUN NOT VACUUMING. IT SEALS BUT DOES NOT GET THE AIR OUT LIKE IT USE TO Does it hum as though it's vacuuming? If not, it's probably broken - the vacuum pump is out. It's cheaper to

...FoodSaver will be helpful. Have you cleaned out the vacuum hoses by removing them from the vacuum? Stretch them out and look down the hose if you can't see through them then get a broom or mop handle ...

how can i replace gauge in a V3840 foodsaver . The gauge are glued in It would be a warranty issue. Vacuum Sealer Replacement Parts & Accessories ' FoodSaver https://www.foodsaver.com > ...