Questions & Answers for: fluke 856042

Fluke 51II when I turn on it says CAL. Err One possible reason: there was steam or water inside the meter through probe. The easy way to fix, just try to Dry it as much as possible (if you like, you ...

fluke 725 repair not sure what model but you can return to Fluke for repair

Fluke 705 loop calibrator fuse blown Hello. I have a blown fuse and relay on my fluke 705. Does someone can tell me the reference of this fuse and relay? F1 and U11 on the pcb. Thank ...

fluke 123 lcd fault If LCD is faulty then order one from fluke and replace.

fluke 741b won't turn on Make sure battery is fully charged, or try external battery eliminator , if that does not help then return it for repair back to Fluke. They may not be supported for much ...

my fluke 45 multimeter displays error 6. how can i solve it? This is explanation on Error 6 from Service Manual: EEROM (A1U5) meter configuration corrupted or EEROM not initialized. At power up, A1U6 ...

Fluke 87v F8-error send for service to fluke (microprocessor chip faulty)

need the model number of a fluke clamp on meter, serial number is 21530517 I lost the meter and need the model number try looking for Invoice (it should have model) on it or ask place where you ...

what is the location on model 116 serial number You can find this information here: http://en-us.fluke.com/customer-service/safety-notices/Fluke-11X-DMM-Recall.html

fluke eepr err displyed refer page 14 of the user manual. Unfortunately you cannot do much as the memory chip containing the program is developing a fault. You could try to find if it is in a socket ...