Questions & Answers for: flow running pool pump without

Question about 1 hp Swimming Pool - Jet / Well Pump Motor / Century B122

1 Answer

...flow in that jet and one other jet. Any suggestions LOOK AT THE HAIR BASKET ON YOUR PUMP IF IT HAS CRACKS IN IT ( LOOK CLOSE) YOU HAVE A PLUGGED IMPELLER , YOU WILL NEED TO TAKE THE PUMP APART TO ...

Ad

Question about Automatic Salt Water System for Above Ground Saltwater Pool

2 Answers

...flow from inlet to outlet? You should be shooting a pretty good stream (wave form) across the pool. You can remove the filter from the pump and run it without to see if you eliminate the error. if ...

Ad

Question about Automatic Salt Water System for Above Ground Saltwater Pool

5 Answers

...flow feels fine when you put your hand to the outlet. I finally removed the cylindrical filter from the pump and am running without filter just to keep pool chlorinated and copper ions until I can ...

Question about Krystal Clear Model 635 Pool Filter Pump 1500 Gph

1 Answer

...impeller is not jammed. However, if you left the filter running without proper water flow, it is very possible that you burned up your motor. If this is the case, you will have to replace the

Question about Krystal Clear Model 635 Pool Filter Pump 1500 Gph

1 Answer

...running without any flow of water is one of two things. The impeller inside the pump that is connected to the motor is broken or clogged. Open up the pump and inspect the impeller for debris or ...

Question about 1 12 Hp Super Swimming Pool Pump Sp2610x15

1 Answer

...MAY BE AT THE END OF IT'S LIFE, SO TRY RUNNING IT WITHOUT THE FILTER IF THIS SOLVES THE ISSUE.. FILTER TIME . IF NOT YOUR IMPELLER MAY BE PLUGED HERE IS HOW TO GET TO THE IMPELLER TO CLEAN

...pool' the psi drops to 0 and nothing flows. It still all sounds like it is running. When I turn it to 'spa' the psi goes up and water flows to and from the spa. I removed and ...

...with a new filter pump in place...how do i stop this alarm? is pump hooked up correctly? if so are filters clean? try running without filter cartridges in to see if more flow otherwise need more ...

...flow sensor and cleaned the titanium i have called intex 2 times and tried everything they suggested with no success. are your filters clean? try running without cartridges if it still errors out ...

Question about Krystal Clear Saltwater System Pool Chlorinator 54601e

1 Answer

...flow changes if not try running without filters to see if flow increases if not check the impeller to the pump might be clogged with hair or debris if that doesnt do it you might need a stronger ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

David Spradling
David Spradling

Level 3 Expert

13522 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...