Question about Floormate H3000 Upright Wet/Dry Vacuum
...Floormate for $5.00 at a garage sale and it had worked well up until the solution quit dispensing. I only wish that I had read this suggestion prior to taking the whole ^^^$&(()** apart and ...
...floormate problem I can kind of wash my floor but the water has a hard time dispensing onto the floor, and when I go to dump the water, there is none. Only dust and hardly any of my water has been ...
Question about H3030 FloorMate SpinScrub 500 Upright Wet/Dry Vacuum
...water down on to the floor. It seems to be a common problem with this series of floormate... some home quickfixes (a hassle, i kno) but put downward pressure while using the solution.... Check your ...
Question about Floormate H3000 Upright Wet/Dry Vacuum
...Floormate won't dispense the clean solution. With the tank off, I pull the handle and the little thing inside the circular fitting goes up and down and is wet from the tank. However, it doesn't make ...
...water, put it back on the Floormate, and hold the solution "feed lever" on until it starts dripping water. The hot water will hopefully disolve the dried solution and allow it to flow again. I hope ...
Question about Floormate H3000 Upright Wet/Dry Vacuum
my hoover floormate will not dispense water My hoover floormate will not dispense water make sure check valve in the solution tank moves up freely. check that the sprayer tips are not cloged.
Question about Floormate H3000 Upright Wet/Dry Vacuum
My machine no longer dispenses the water in the wet vac. The dry vac works perfectly either the pump went bad or there is a clog in the dispense hose.
Question about FloorMate Hard Floor Cleaner - FH40010B
floormate fh40010? cleaning fluid does not dispense I was having the same issue with my NEW just out of box Hoover FH40010. First run on the floor was great then the water/cleaner stopped dispensing!!
Question about Floormate H3000 Upright Wet/Dry Vacuum
...Floormate, and may have a few different things that may be wrong. First check the fresh water tank is seated or installed properly. Second, it may be the pin on the actual unit itself that is not ...
Question about H3040 FloorMate SpinScrub Widepath Remanufactured H30
...floormate spin scrub solution dispenser button is difficult to push and when I do push it I can not see the plunger rod moving to raise the solution tank plug. How do I fix this? The plunger assembly ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions