Questions & Answers for: HP LaserJet flip side

...flip open the top cover, and look on the top of the right side cover, there is a latch, push it down to release the side cover, and pop the back of the right side cover off, the side cover will flop ...

...driver. Now we can no longer print double-sided automatically. We have to go to the machine and flip the paper. Is there a setting within the print screen that needs changing? The printer did ...

...but it will not allow me to print on both sides of the paper. It will print one side then it flips to the other side and says "processing", but nothing happens Hi, Unless the driver has an ...

...Flip it to the gear side (the left side) and press inwards on the fuser tab to make sure it is fully clicked in place, as shown below. Then flip the fuser over to the right side (the non-gear side) ...

...the 61.74.561.43 driver that I cannot get the Print on "Print on both sides" to change from Yes, Flip over to None. I go into Printing Defaults, Printing Shortcuts and on the General Everyday ...

print, click Print and then Preferences. On the next window you will have Print on both sides, tick Flip on long edge and if your printer has duplex capability it will print both sides now

flip and print on the sheet's other side. Its probably a 'bolt-on' option to the printer and may not be seated quite right, so not all its connections are making good contact. Careful, though as there

...flip the page over and print page 2 for the reverse side. It may be necessary to experiment a few times to achieve the proper printing orientation. You can download a copy of the users guide from the ...

...Flip it to the gear side (the left side) and press inwards on the fuser tab to make sure it is fully clicked in place, as shown below. Then flip the fuser over to the right side (the non-gear side) ...

...flip up the back side. I have my driver set to duplex print and flip up, but it won't flip up. Is there some setting on the printer itself that needs to be adjusted? Why won't it flip up? I ...