You may need to remove the print carriage to get to the jam. 7. Replace all parts and return any access panels to their closed and locked positions. Plug your printer back in and flip the power switch
...feeder jam , but paper is not jam inside, Check input paper feeder at top too - easy to miss. Top flips open with a firm (but not excessive) pull, so you can look there. If you are sure you've ...
...You may need to move the print carriage out of your way to clear the jam. 7. Step 7 Return any access panels to their closed and locked positions. Plug your printer back in and flip the power
...You may need to move the print carriage out of your way to clear the jam. 7. Step 7 Return any access panels to their closed and locked positions. Plug your printer back in and flip the power
Plug your printer back in and flip the power switch. Thank you for using FixYa Don't forget to vote thanks!!! Even the best all-in-one printer has the occasional paper jam. You should be familiar with
Question about Powershred SB-97CS Shredder
plug it back in and flip the switch from forward to reverse a few times and then keep repeating the process until jam is cleared. 2. Use tweezers to remove paper from critical connection teeth and the
AC UNIT TRIPS THE BREAKER WHEN PLUGGED DIRECTLY TO WALL OUTLET AND FLIPS THE SURGE PROTECTOR TO OFF ALSO. WALL OUTLET WAS REPLACED AND STILL THE SAME ISSUE. The problem might be in the compressor or ...
Question about M6Y18F7A Air Conditioner
Flip over basin plug jammed in plug hole have tried using hammer and wood pole but it will not shift any other suggestions? Sink is wall mou Ted and I can't access the waste connection. Using ...
Question about 2010 Taurus SEL
...the connector will have a lock which is a different colour or the same colour as the plug it might be a slide lock or a press and flip over and remember to remove the weather proof rubber boot ...
Question about 2010 Taurus SEL
Louisann pellet grill series 900 ? model# flips breaker everytime when powered on. Why? Has never done this before. My grill is fairly new 12-14 months old. Has stayed in the same spot and worked fine
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions