Questions & Answers for: Lincoln flex plate

...crank moved back enough to not engage ,with a manual the clutch would push it forewards.or the flex plate on the back of the torque converter damaged and broke in teh centre where bolts to the ...

...PARKED AND PRESSING ON GAS DOSENT MAKE A SOUND TOOK IT TO 3 DIFFRENT MECHANIC THEY ALL SAID NOTHING IS WRONG WITH IT sounds like the flex plate ,this holds the torque converter to the ...

...the transmission and tighten or replace the flexplate Some starters require shimming to avoid flex plate interference. Hopefully this is the case for you and not a bent flexplate. Hope this

...flex plate. Often time, replacing the back end of the engine becomes necessary. What he is saying is he may be able to get an engine and put it in for cheaper than all the labor involved with what ...

flex plate is not cracked. The flex plate has the gear on it that the starter gear comes out and contacts to turn the engine over. Also when you pull the inspection cover to look at the flex plate and

flex plate makes a noise I get a clinking almost ticking sound by the starter when I drive my car The flex plate may be cracked and this is causing it to hit the starter drive or other point inside ...

my 2000 lincoln towncar makes a awful noise not flex plates not steering fluid brakes . i have to rev engine to stop this .not belts this noise will sometimes start upon starting car or minute I go to

...flex plate that the converter is bolted to. look for cracks in the plate around the bolts . undo the bolts and move the torque converter back towards the gear box and look for cracks around the ...

...flex plate bolts can lead to a broken crankshaft. I have a poor fellows broken crankshaft here to prove it. So, please do it correctly and carefully. Also, change the armature bearing. It's cheap ...

2000 Lincoln la v8 flexplate rattle at idle only after Trans work by aamco how do I fox it take it back and tell them to fix their fault. Probably loose torque converter bolts in the flex plate.