Questions & Answers for: Dodge flex plate

...flex plate on a 2001 Dodge Stratus, 3.0 engine. 2001 Dodge Stratus, 3.0 engine. After removing the inspection plate on the botton front (or engine side) of the transmission, I see the flex plate it ...

Ad

Question about 2006 Ram 3500 Truck

1 Answer

flex plate to get to the flex plate bolts. 2007 dodge ram 3500 6 speed manual transmission theres an access cover under the turbo on the front of the bellhousing (2 10mm bolts) that you have to remove

Ad

Question about 2006 Ram 3500 Truck

1 Answer

...reverse or drive......just replaced motor, flushed torgue converter and changed transmission filter and fluids......help Check your flex plate and make sure there are no cracks around the bolt

...flex plate bolts to see if that is were my noise is coming from The inspection cover is usually plastic, it is bolted to the under-side of the bell-housing and it is held in place usually by 4 small ...

Question about 2001 Ram 1500 Truck 2WD

2 Answers

...the engine. if you remove the inspection cover you will see the flex plate and eventually all the bolts. yes it does have bolts on the torke converter atach to the flywheel or flex plate check them ...

Question about 2004 Durango

2 Answers

...flex plate, but it will not spin. I got it to start once in neutral since it stopped working, but it has not happened again. Please help. Have you checked the flex plate? It may have a bad spot on it ...

knocking still there You need to proof read your problem, confusing. So someone told you it was the transmission? It could be the flex plate, "flywheel". Loose flywheel bolts or the flex plate cracked

...flex plate on 2004 Dodge Stratus 2.7? I just changed the flex plate and now I'm not getting fire. The car won't start so how do I align it? I must not have put it on there right. i believe that the ...

flex plate how hard to fix if i do it and if i drive on it what will go on with it Well you would need to pull the transmission back far enough to unbolt the plate from the crankshaft. The plate could

big ends,cylinder head,flex plate,flex plate to torque converter and cam shaft caps automatic You probably can get an owner's manual online to help you with those isssues for your fancy car. Good luck

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Dodge Caravan
2000 Dodge Caravan

2,271 Questions

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

1999 Dodge Ram
1999 Dodge Ram

1,788 Questions

2000 Dodge Durango
2000 Dodge Durango

1,616 Questions

2005 Dodge Caravan
2005 Dodge Caravan

1,496 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...