Questions & Answers for: Hitachi flashing red led

...Red LED D912. After a few Seconds. D946 and D939 Power on and then Red LED D912 Lights Bright and then Flashes all rest go Dead besides D912 Flashes. What would Cause this? The FlyBack? my hitachi ...

...flashing of red "protect" LED. No shorts or excessive loads in other parts of TV because no difference when power PCB is disconnected from the audio/tuner PCB. Still powers up for 2-3 seconds when ...

flashing red light means that the tv is in protection mode. The tv will not turn on when the red LED is flashing. The most common problem for Hitachi are the convergence output ic's. But they useually

...lamp LED would blink red and then after a moment the power and lamp LED would stay on solid RED. lamp duration hitachi cprx 78 lcd projector all leds blink in red when i switch on the ...

...Model # 43FDX11B. Will not power Hitachi - Rear Proj. TV Model # 43FDX11B. Will not power up, red power LED just keeps flashing red. Mine just developed the same problem.. did you find a

...red flashing. Lamp LED is a solid red. What does this indicate? Hi, It sounds lamp is dead in this projector and need to be replaced. Lamp replacement procedure would be written in user manual so ...

...TV, when I turn it on, the power blue LED comes on and then after a couple seconds, the TEMP and LAMP led start flashing red. No sound or display. Manual indicates lamp or cooling fan

...red flashing power light. Have replaced the convergence IC's but no change (do not have the chirpint sound). Removed main power board & green LED does not light up No picture or sound with a ...

...self check.Voltage checks usually don't reveal much==the voltages will come up and go down instantly.If that red is dim and flashing it is at the input of the primary part of the power ...

...red power on, but when I press power button the screen flash then shut down and the blue light blink three time then stop.Do you know the problem ? check for bulging capacitors ...