Question about Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+
...door What do 4 flashing lights mean on craftsman door opener and door will now go down with remote have to hold the wall button 4 FLASHES Safety reversing sensors slightly misaligned (dim or flashing ...
Question about Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+
...door open by helping. If you can try closing it and see what happens. On the rear of the motor unit you will see a small LED that flashes. Random flashing is normal but see if it is flashing a code. ...
Question about Craftsman LiftMaster Chamberlain Garage Door Opener Wireless Keypad Model 976LM Security+
door opener is flashing a code 4 flashes then a pause then 1 flash then a pause then 1flash any ideas? 4 flashes is the code for door sensors slightly misaligned. The code you describe is not a normal
...suppose to flash one or two time, but last week, the door lock and unlock with the remote work fine, but the light stop flashing.... all doors need to be shut including trunk lid for light to ...
Question about 47702 / 47704 / 47709 Electric Single Oven
...door locked" always flashing if I push"off/cancel there is a crackeling noise and "F9" fashes for a while then stops, Display flashes "door locked" but door will open but will not heat and now always ...
Question about KDF-E42A10 42 in. LCD Television
my kdf-e42a10 tv won't come on flashes green 7 times then flashes red 3 times. it only flashed green to begin with but when i took the bulb out it would flash green 7 times then flash red 3 then ...
Question about KDF-E42A10 42 in. LCD Television
...flashing. Have tried pushing start/pause light but it still won't open. Machine is 1-1/2 yrs old. A Door Unlock Error occurs if the door cannot be unlocked. It will try to unlock the door 5/6 ...
Door will not lock Led flashing Machine stopped during a wash and lock LED started flashing. I have replaced the door solenoid but the door will not lock and lock LED flashes Door switch fault.
Question about WMA50 Front Load Washer
...flashing red light limit set Door not opening, up down button green light flashing, set limit has red light flashing Check your user guide if available. It sounds like you haven't set the door open ...
...flashing, the door will close. The door control switch has to be pressed all the way till the bottom of door reaches limit floor. Door will reverse if the door control switch is released. The ...
Usually answered in minutes!
4,713 Questions
76 Questions
33 Questions
36 Questions
