config to flash 6. configure asdm image default location and reload 1-issue command dir all or show flash 2-delete old file and squeeze it. 3-take out flash card, use card reader to save new asdm file
Question about Catalyst 2926 (WS-C2926) Networking Switch
...flash:config.text flash:config.old to rename the configuration file. This file contains the password definition. Type boot to boot the system. Enter N at the prompt to start the Setup program, ...
Question about Catalyst 3550-24 24-Port Ethernet Switch (WSC355024FX)
flash:config.text flash:config.old to rename the configuration file. 8>Issue the boot command to boot the system. switch: boot Loading "flash:c3500xl−c3h2s−mz.120−5.WC7.bin"...######
...config on a file called "network-config-10.1.1.5" with: "system-config-network-cmd -e > /root/network-config-10.1.1.5" 2 - After the Server refuses to complete boot sequence, I rebooted the server ...
...my router and disabled my firewall. Try adding this line to the config.wtf file in the WTF folder in the World of Warcraft folder: SET fixedFunction "1" Use WordPad to open the config.wtf
then defrag. Clear Group 2, flash, ram and then defrag. Sometimes older CONFIG SYS information will stay active within the terminal. Clear out the CONFIG SYS and you should be ready for a new download
Question about Allied Telesis AT-8000S/16-10 Managed Ethernet Switch
...config Delete startup configuration (Reboot from defaults) flash:// Delete a file from the flash (flash://filename) WORD Specify name of file KIMIA# delete startup-config <cr> KIMIA# delete ...
Question about Allied Telesis AT-8000S/16-10 Managed Ethernet Switch
flash:config.text flash:config.old Rename config.text to config.old. In that file the password is stored. 9. switch: boot 10. Enter "n" at the prompt to abort the initial configuration dialog 11. Type
...flash: renameflash:config.textflash:config.old 5. Boot the 3750 switch by issuing the "boot" command and pressing "Enter." 6. Issue the "en" command at the prompt, and press "Enter." You should see ...
...flash drive must have bootsector area. This is done with special utilities. 5. References to "A:" drive lines in the autoexec.bat and/or config.sys files you copy to the drive after you make it ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions