Questions & Answers for: Ford F-150 flare manuals

...brakes are joined. You can remove the steel brake lines using a standard open end wrench although a flare wrech is recommended. You can purchase different length brake line at any parts store to ...

my tailgate is stuck on my 2004 ford f150 flare side dosn't want to unlatch is there a way to do it manually so i do not kick out my tailgate I had a 94 with the same problem. On the inside of the ...

...that will make up a new line and splice the new one in. This requires the tools to make up a double flare in the line where it was cut. They may decide to replace the whole line which might require ...

trying to disconnect to replace the fuel filter.Put the right size one on and push or pull into the flare on the line,sometimes it's not easy ,but it will eventually disconnect

cheap but it has to be the same size and you just stratien it out. You will need a tubeing cutter a flareing tool and some brake fittings. You can also buy stright sections with the flare and fittings

how to bypass heatercore un hook heater hoses at the heater core insert a steal barb fitting clamp down Check your hose sizes per specs. Then all you need is a connector to join the 2 ends together. ...

tightening a flare but fitting Installing a new brake line, the flare but will not turn in the line Is it your line 1/4"

flare but will not turn on the line when installing a power steering hose. Can not get flare but to turn on a new power steering hose. IF FLARE NUT WILL NOT TURN FREELY ON METAL PART OF LINE YOU HAVE ...

...isn't the old brake line on there? The new brake line would connect the same way, probably with a flared end. If the old brake line isn't there....then you'll need a fitting for your brake line. I ...

I have a 2000 f150 lariat 4wd 5.4L. My brake line for my front wheels coming out of the master cylinder has a hole in it. does anyone know what the part number is or where i could find it? Normally, ...