Question about 2004 Santa Fe
...are 3 bolts,remove these,and the bottom section will slide right out of the hose.using an 11 mm flare nut wrench,gently loosen the brake line from the bottom of the front proportioning valve.it
...01.its on the driver side strut tower,you will need to remove the air filter box for access.14 mm flare nut on bottom line,10 mm bolt on top line.book said the 01 only has screen on pump but it was ...
...Are there any seals in the lines that go into the master cylinder unit. no they are inverted flare fittings no seals check all lines and calipers/wheel cylinders if all are dry remove the ...
2002 hyundai, rpm's flare... hwy driving goes up to 4500 rpm andonly doing 100 km/hr....feels like its stuck in 2nd or 3rd gear.... driving at 60km the rpm's jump from 2500 to 3500 rpm... only last a ...
Looking for the paint color of the Fender Flares so I can make some repairs. The color code will be on the door frame label The flairs are another issue Check with a body shop on that one It may be a ...
will then need either a "Bubble" flaring tool or a "Double" flaring tool depending on which type of flare your vehicle uses. You must look at the end of the original line to determine which it is. The
Hyundai XG350L rear seat does not release button to release seat is stuck You can go for your owners manual and then look for the page where you can find the solution for your Hyundai. - Protect the ...
shifter cable stuck on Santa Fe There are several possibilities. Your cable could be broken and flared out. Your release button may be broken. You may have got something wedged into the shifter. Check
Hyundai Tucson slows then surges at low revs adaptive learn transmissions in these cars and if multiple drivers the system is doing its job,in extreme cases some ECM/TCM updates are available through ...
Usually answered in minutes!
1,503 Questions
1,180 Questions
1,131 Questions
1,254 Questions
1,082 Questions