Questions & Answers for: Oldsmobile flair parts

so get the right size. Get the brake line fittings. You will need tubing cutter, tubing bender, and flairing tool. Just cut it to the right length, bend it to the right shape, and install it. Presto!!

...Parts Source. Regardless on which shocks your going to use, it's a good rule to replace both sides at the same time. The only difference in to reinstalling the air shocks is you need to reattach the ...

...parts and I don't want anything to backfire, literally or figuratively.....suggestions? On a return hose, your idea is fine. Use clamps made for fuel systems as they don't bite into the rubber. I ...

...line and the pipes The rubber hose you buy at the auto parts store. If you have rusted and leaking hard lines,they also have them. But you have to cut,bend and flair,the ends yourself. No other way

...bulk line. All the fittings are available at one of the big box parts stores (auto zone, advanced, napa, car quest). For safety sake i would have someone with a line bender and flair tool replace