Questions & Answers for: fixing hoover windtunnel switch

...Hoover 6446-900 Windtunnel vacuum cleaner if you haven't already gotten this fixed, simply remove the two screws on the bottom of the handle. Inside is the cable; please make sure to unplug your ...

...Hoover Windtunnel upright vacuum cleaners is operated by a lever in the handle assembly. remove the two screws on the back ovf the vacuum and see if the lever has bypassed the switch assembly. if so, ...

...Hoover U6437-900 U6439-900 Windtunnel Upright seems there is a short in the power switch, is that possible, I have it disassembled and seems there is power going into the on/off button, but will only ...

...Hoover Wind Tunnel Vacuum All of a sudden, my vacuum will not work. When turning on, sometimes it attempts to power on for a second or two but mostly it does nothing. The switch clicks so I do not ...

...hoover windtunnel v2 the brushes underneath wont turn ? its suppose to be beltless what do i do to fix this Are you sure it is beltless? What model do you have? Looking at another manual there may be ...

...Hoover Windtunnel does not clean carpet. The machine keeps grabbing the carpet. It appears that even with the switch set for carpet, the machine keeps acting as though it were set for a hard floor. ...

...Hoover Savy windtunnel (bagless). The electronics in the handle are constantly going out. First things first though, recline the unit and turn the vacuum upside down so the front is resting on the ...

...hoover windtunnel bagged self propelled The carpet / floor switch is a mechanical assembly. the bottom cover needs to be removed to expose the screws for the hood cover to be removed. then the switch ...

...Hoover WindTunnel Vacuum I have a problem with my Hoover WindTunnel Vacuum. The Carpet/Floor switch seems to be off. When turn to carpet, the vacuum runs really faint. I have to put down pressure on ...

...not associated with them, I just found them quickly and the part quickly. I love the vac, so it's worth a few buck to fix