...signal if the selector in 'P' position. If you give me an e-mail address I'll send the wiring. The ABS problem, you have better to check followings. - All the wheels bearings' play. - are the ABS ...
...turn it to the ON position. With the brakes applied, try moving the shifter out of the PARK position.If the lever now moves freely in and out of PARK, perform the Circuit Test below. If the shift ...
...TURN SIGNAL LIGHTS ARE ON "0" POSITION AND THE BRAKE IS PUSHED OR THE LEFT TURN SIGNAL IS USED EVERY LIGHT IN THE CAR DIMS. WHEN THE TURN SIGNAL LIGHT ARE SET TO "1" OR "2" ALL THREE LEFT MARKER ...
turn signal I am having a problem with my 2003 Land Rover Discovery SE turn signal. The rear signal does not work and I have replaced the bulb. What could be the cause? Could be a loose connection on ...
Question about 2004 Range Rover
turn signal won't work after replacing bulb 2004Range Rover When you flip the lever on the steering column to activate the right turn signal, the dashboard indicator signals very rapidly and the front
...turn signal that was not working and I tested the harness and everything was good tested the assembly and all turn signals and even the hazards stopped working. I'm trying to trouble shoot to see ...
Question about 2001 Range Rover
...signal does not activate how can I get the signal arm to indicate turns. hazard light work but no response from signal arms/lever have you checked the fuse? make sure you have power to the
...Ask a local auto electrician to test the vehicle for a breach. On your gearbox is a switch in the front of the gearbox. trace signal from there and work your way towards the gear lever
Question about 2004 FreeLander
my 2004 freelander turn signals do not work, when activated relay buzzes and I get no turn signal. ive installed 2 new relays and a ne turn signal lever switch and did not fix try changing the bulbs.
Question about 2004 FreeLander
...Select P if auto, apply foot brake. Push and hold EPB switch/lever down. Turn ignition on, wait for system check to cycle. Start engine. Release EPB switch/lever. The EPB should have now ...
Usually answered in minutes!
931 Questions
392 Questions
318 Questions
325 Questions
340 Questions