Questions & Answers for: fix stuck trunk latch

...trunk latch stuck & won't open 2004 acura rsx trunk latch stuck & won't open. Fuse & acuator is ok could be the spring release in the lever on the trunk itself. If you can hear the acuator ...

fix? With the trunk open try putting the key in and turning so that the latch swings open. This may be the problem. The latch may be stuck closed. with the key turned make sure the latch is open if it

...position. It it is in open position then there is 2 possible root causes: 1- The cable pulling the latch to open gets stuck. 2- The spring broken or out of its position. Hope this can help to fix

...stuck not allowing to open trunk how would i get the trunk open? Cant go through the back due to having a speaker system and speaker box is in the way. I have the same problem. I've found that if you ...

stuck in a position that prevents the trunk from closing. Can i fix this, or do I need to buy a new latch? spray some WD 40 on the latch. should do the trick. i had that problem with my sunfire in the

...fix this prolem? either the latch is broken, repair parts will be needed, or the catch loosened and needs adjusting. does the trunk close with a motor? have you tried unlocking the trunk? maybe the ...

fix trunk latch on 2003 mazda tribute electric trunk latch is stuck in the closed position. refuses to open no how many times i push unlock. only time i did was attach a bungee cord to close the hatch

...fix My 2006 Chrysler 300 trunk...it will not close. It just happened and not sure if a latch or something is stuck. Has anyone had the issue of their trunk not closing? I'm not sure if the latch is ...

...stuck to the bottom rail where it holds. Trying pressing the trunk buttons but nothing happens. The whole latch assembly is locked to the rail part. How do I fix this? personally I would go see my ...

...stuck down since my latch on the trunk won't stay shut unless pressure is applied. And once the pressure is let go the warning that the trunk is open pops back up. I tried to find the release latches ...