spark plug wires replace sparkplug wires in correct order 1..2...3...and then 6
spark plug gap spec. for 1997 ford ranger/4.0 liter need spark plug gap spec for 1997 ford ranger 4.0 liter for the most part it is under the hood of your car where the sticker say engine size try ...
...SPARK 1997 FORD RANGER P/U , 4CYL, 8 PLUGS. HOW DO YOU ACCESS LEFT REAR SPARK PLUGS FOR CHANGE OUT. DO YOU HAVE TO REMOVE INTAKE MANIFOLD. You have to remove the front passenger side tire and access ...
...spark plug, is needed replace it with new if going for change of spark plug do go for the NGK, or DENSO, brand check for proper igniting of spark from ignition coil, check for wear of ignition spark ...
...ones,all 8 of them.If you do not have spark on all plug wires,pull the timing belt cover,and align the cam shaft and the cam,to see if the belt has jumped.If It hasn`t,replace the crankshaft
...spark plug. Once you have replaced the plug, replace the plug wire. This ensures that you dont mess up the sequence of the wires which determines which cylinder fires at what time in the cycle. VERY ...
...you replace the wires? if not you may have broken a couple of wires. Not sure what fire wire is unless you mean the spark plug wires. Also did it do this before you replaced the plugs? need to
...fix the problem,remove the suspect plug and check to see if it is firing by laying the metal portion against a good ground and then have someone turn over the engine while you watch for spark,if you ...
i have a 1995 ford ranger with a 4.0 engine it need a tune up can you show me how to install the wires and spark plug http://autorepair.about.com/library/firing_orders/bl-fo-6614.htm
...enough energy being transferred to the spark plug to ignite the engine. If it isn't the battery, then you should have it towed in to a mechanic. If its getting spark its not the crank ...
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions
