Questions & Answers for: fix reverse lights stay time

...reverse light switch on the manual gearbox, since then they are stuck on all the time if you remove the switch and operate by hand it works ok. are their any common internal faults with gearbox the ...

...reverse lights are also staying on. Have a friend look when the REV light is indicated on the dash. Replace the limit switch or re-adjust it. It is a magnetic switch that may have gotten misaligned ...

reverse lights will still be on. How can I fix this problem and have them only turn on when I reverse? The reverse light switch is probably stuck. Its a plunger type of swich located at the gated part

...stay on all the time), but when I put it into reverse the OFF light comes back on. Is there a reset that needs to be done e.g. turn ignition on and off x times and push a button? Thanks You have the ...

...reverse lights stay on all the time how do i fix this problem Hi...sounds like your Neutral Safety Switch needs to be adjusted. Loosen screws enough to slide switch one way or the other until your ...

...fix the problem... any suggestions as to what could be causing the reverse lights to stay on? Hi Shawn, The reverse lights are grounded via the switch on the gearbox, meaning that the live feed is ...

...under drivers seat. if this doesn't work I wouldn't pay to fix, I would pull the reverce light fuse or take out the bulbs and if you want reverse lights add some with a different swich on the ...

...reverse. Any ideas? A word of advice. If its new and under warranty, DON'T TOUCH IT! We at our shop have had this same scenario and after we fixed it the company refused to pay the labor fees because ...

...reverse light switch is part of the shifter switch located on trans housing,a cable or rod is attached to it. These items fail internally, unfortunatly most times the fix is to replace the assembly. ...

...reverse lights. It usually is close to the automatic transmission cable attachment point. This is a plastic part that may have come loose or broken. It shouldn't cost much to fix. The dealer will ...