...mirror in place with rubber-band, hangs loose, don't know if I need a new mirror, or clip... don't know how to fix. Housing or just the mirror? Most mirrors are glued to their holders these
...mirror correctly (still works, just only in two directions). How can I get at the motor and other guts to replace or fix? yea. both my mirrors started flopping around like they were not latched or ...
...and its base; often the movable portion has a locking ball with spring that sits on notches on the fixed/bas portion. These determines the lock and folded positions; If nothing is cracked or broken, ...
...mirror cover comes off exposing the pot metal attatchment points where the spring is attatched.Where the retainer broke ,all you have to do is take a drill and drill a hole just over from where the ...
...any more problems with that mirror. Hope this helps. Hi,whilst reversing the drivers wing mirror popped out (the whole thing) and is hanging by a cable. My car is a Mercedes Benz 200. Can I fix
fix the mirror on my mercedes benz both are luse and idont know how to git in to them Pull off interior piece opposite of mirror on the inside of car an you should be able to access the mirror ...
...of the mirror they are not always that obvious but they click back in or should do. to the round fixing plate push from the middle and
side miror pop off only the glass, of to fix it ? new mirror complete ,might be able to stick a universal glass on ,
Question about 1998 C-Class
...mirror lens work. seems as though there is no power to the whole unit but it does fold in when locked. The glass does not tilt or move in any way. could it be a common problem to both? Thanks. Henry. ...
...fix was for that was two part epoxy. I glued the mirror to the support bracket, reattached the plastic cover and it is as good as new.Just be carfull of the circuitry in the mirror. To be extra ...
Usually answered in minutes!
630 Questions
563 Questions
615 Questions
474 Questions
420 Questions