Question about KSM90 Ultra Power Series Stand Mixer
...fix it in no time. Hot to repair if it show (error 17 and 32)When we push button start (magnetic switch lock) maybe 0.21s (the magnetic switch is unlock) You may have a few screws loose or need to ...
Question about KSM90 Ultra Power Series Stand Mixer
...switch mechanism at the back of the mixer, accessable by taking off the rear piece with one screw. as you face the back of the mixer with the back cover off, you will see the contacts on the inside ...
Question about KSM150PS Artisan Series Stand Mixer
...lock switch movement when they age. Under the latch is a spring washer that holds the switch above the level of the gasket but as i said when they age they warp upwards and ...
fix. Where is the speed control switch? Glad you asked. It is in the rear of the machine. There is a round bubble shaped cover at the rear of the mixer called the end cover, it has one screw (Phillips
Question about K5SS Heavy Duty Commercial Stand Mixer
...fix. in the worst situations I have had to drill it out and replace the planetary and center shaft, I have used a torch which is a good solution except that it trashes the finish, the easiest way is ...
Question about KSM150PS Artisan Series Stand Mixer
...lock and the lever would slide all the way to the left, locking the mixer head properly. I put in the beater attachment with the mixer head up (machine was unplugged) and the beater advanced backward ...
Usually answered in minutes!
493 Questions
357 Questions
324 Questions
285 Questions
205 Questions