1998 Proton Satria Gl Indicators 1998 Proton Satria GL Indicators and hazards not working, replaced fuses no change. Everything else is working, bulbs look fine. Not fuse relay box that plugs into ...
...hazard lights and the indicators are not working. Ive checked the fuses and none are blown. I tested the flasher in another vehicle and its working fine. I doubt its the switch as both the hazard ...
...light and check engine lights have come on car juddery as i limped it home Check alt bat This model have a common ignition coil problem. Replace ignition coil and spark plug will fix the
Question about 2009 Savvy 1.2
...proton savvy 2006 and my indicators work then stop then start then stop again sometimes I can't get them to start working. I've changed the hazard warning light switch plus I've changed ihe ind ...
Turn off engine light on proton jumbuck Need to reset Engine light fix the fault and use a scanner to reset the system
Question about 2009 Savvy 1.2
...Proton S16 emission light (solid) is on, not sure what this means? it means that you have a problem with the emission control sensors and need to have it checked out have the fault codes read to ...
Question about 2009 Savvy 1.2
hazard lights not working? I have replaced the flasher unit and checked the fuse and the bulbs ect Jake, Could be a ground issue, wire off, corroded, if you have checked everything else but the switch
Question about 2009 Savvy 1.2
hazard lights. I have checked the hazard switch and all the fuses but can not locate the relay which I believe is a separate relay to the indicators. I have checked the hazard switch and all the fuses
Question about 2009 Savvy 1.2
fix the dashboard panel no backlight and headlight not switch off warning beep sound of Proton Saga BLM 1.3 Kindly advice and Thank you Dashboard backlight works together with the tail light. Both the
Question about 2009 Savvy 1.2
Proton Gen2 2008 When i Start my proton RPM meter go direct to 8k?how can i fix the problem. The crankshaft sensor in error will make this happen. Replace a new sensor problem will fix.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions