...to what this is. My machine is going through the motions of the zig zag stitch but is only straight stitching. I have changed the needle to no avail... thank you! Jeanne how to thead the euro-pro ...
Question about 9120 Computerized Sewing Machine
...euro pro multi stitch sewing machine. I simply need to know if there is a special kind of needle needed to replace a brokne one in the euro pro multi stitch model 9000/. Thank you and have a nice day ...
...Euro-pro model 361 my Every time I use my Shark Euro-pro model 361 my needle breaks. gone through sooo many needles. Are you inserting the needle fully into clamp? You may have a bad lot of needles ...
...euro-pro sewing machine the thread keeps breaking so it isn't working!!! How do I fix this? you may have needle in wrong make sure needles flat side is back of the needle holder. Check if threaded ...
my machine is not picking up the bobbin thread check the needle to see if it's damaged make sure to have a 3-5 inch thread tail on the bobbin then make sure the top thead has a 3-5 inch tail , then ...
Question about Denim Sewlution 380 Mechanical Sewing Machine
euro pro 380a sewing machine lost mannel My needle will not pick up my bobbin? I have tryed everthing! my bobbin was placed in the holder right. my needle is in the EP correctly! not sure if my Thread
Question about Denim Sewlution 380 Mechanical Sewing Machine
Euro-Pro 998A Sewing Machine needles What size and brand needle works best on the euro-pro 998A sewing machine? the size & type needle depend on the fabric you use to sew,try these sites for ...
Question about Denim Sewlution 380 Mechanical Sewing Machine
fix this? Euro Pro Sewing Machine - YouTube ? 0:59 https://www.youtube.com/watch?v=QndkRbDfM2w Jan 20, 2009 - Uploaded by simplysoldstore Euro Pro Sewing Machine. ... on piece on top then runs downthe
Question about Denim Sewlution 380 Mechanical Sewing Machine
...fix Euro pro x sewing machine, hand wheel is stuck and can't move ? possibly it is out of time needle hitting bobbin case when rotating and the best fix is a repair shop, when you do not understand ...
Question about Denim Sewlution 380 Mechanical Sewing Machine
...jammed or stuck? I need help to fix euro-pro 420 sewing machine? check the timing . needle hitting bobbin most likely Have you checked underneath the reed dogs for jammed thread and lit build
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions
