Questions & Answers for: fix danby air conditioner cooling

...this unit that will divert part or all of the warm exhaust into the room? 3) If no, how can it be fixed so that dry mode doesn't also continuously cool? Some units do cool/dehumidify only im afraid ...

air conditioner keeps forming ice on the inside behind the filter, why is it doing this and how do i fix it? Two reaons for this. One, the evap coil may need cleaned. Two, you unit may have a leak and

...danby air conditioner model # DAC5078M and it it frozen. How do i fix this? check thermostat setting make sure it ain't on 60 digress cooling or thermostat on 10. if it dosen't cut off anytime and ...

... the back of the AC unit ices up. How can I fix this? It is very frustrating and I am dying from heat. Change the filter. It doesn't have the proper air flow across the coil. Hope this helps. Good ...

...Danby A/C (Model number = DPAC90061), and the flex tube for the exhaust has come unscrewed from the collar that attaches to the window exhaust adapter in the slider kit. I screwed it back into the ...

...How can I use the Danby DPAC 10030(R) without outside hose? you need to get the exhaust air out if the structure or it will never work, you can use regular duct from a supply house as a temp ...

it should, Is there anything I buy to fix this?? Are there any part I can go to home depot and purchase so the air could come out cold? you have to keep the condenser fin clean at all time. vaccumn it

...Danby DPAC90061 cools but does not deshumidify. How can I fix it? First year, I had to empty the tank. Last year, there was no water buildup. Hi, It sounds like you may have a very small refrigerant ...

...air conditioner isn't cooling my living room. is there any way i can get it charged or what can i do to fix the problem? mcdevito75 here, Best Bet, contact your local A/C repair shop they come to the ...

how can i fix this problem does not cool the room like it did before and water does not seem to drain it sounds like it might be cloged up it happend to mine i had to put 2 small holes in the bottom ...