...cable company. All have lead me to the problem is with the tv. I need some advice on what to do next. Steve Usually the fix for that on a RCA or GE TV is to go into the menu (the button in on the ...
...cable connection going into the TV then the program will change to the appropriate channel. Any advice??? Thanks I had the same problem on my TY tuner. The connection on the circuit board is bad. Has ...
Question about AQUOS LC-32D43U 32 in. LCD Television
fix it: 1. Unplug tv 2. Unplug coax from tv 3. Plug tv back in 4. In the Menu go to Setup > CH setup > CH Memory > Cable (digital) 5. Enable channel skip for channel 7.1 6. Push Menu to exit 7. Change
Question about Series 2 80-Hours Video Recorder
fix it. Only this fixed it. We had lost both power and cable during a recent tree fall in a storm, and when both were restored, this problem started. I have a cable coax directly in the back of the TV
cable channel is 4 for TV Go in to the user menu and find where the Auto Channel Setup is located. You can consult the instruction booklet for your TV set. Try this and see if it works. If it does not
fix- 2-6: Select when you want to control all channel selection through a cable box. Select the appropriate channel(usually 3 or 4) and use the cable box's remote control for channel selection. VIDEO:
Question about DTV-373-D 37 in. LCD HDTV
...fix it: 1. Unplug tv 2. Unplug coax from tv 3. Plug tv back in 4. In the Menu go to Setup > CH setup > CH Memory > Cable (digital) 5. Enable channel skip for channel that it is currently ...
Question about DTV-373-D 37 in. LCD HDTV
...fix this for me If using cable you may be able to route signal to rear audio and video inputs--doubt a vcr will help. disconnect power from set and or a box if used--wait several minutes and power up ...
...fix it by unplugging the aerial, manually choosing a different channel then rep lugging in the aerial. Any ideas? Be sure tv is set to antenna and not cable . Do auto scan . Find this in setup menu. ...
Question about DTV-373-D 37 in. LCD HDTV
Cant get tv channels broadcast to work theythey are stuck on Cable channels how do I fix this for digital broadcast yeah Verify menu. There is a selector for AIR / CABLE
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions