Questions & Answers for: fix 2 error elliptical

Ad

Question about Mondeo Elliptical Trainer

1 Answer

...2 or #3. My manual says its the stride motor error, but give no fix. Any idea how to fix the error message? I just found out the service company for this machine just went out of business. Try ...

Ad

...2 when plugged in. It will not move to programs, heart rate or anything else. Has anyone else had this problem? How do I fix it? We had this problem after assembly as well, it turned out to be a bent ...

Ad

Question about 430 Elliptical Trainer

1 Answer

...2 and after a few seconds the screen goes blank. does any body knows how to fix it? Console displays ?E2? error code Solution: A. Check data cable integrity. All wires in cable should be intact. If ...

Question about EFX 546i Elliptical Version 4

1 Answer

...fix the machine? Precor Error 05, Key Depressed at Power Up Probable Cause 1. A key is permanently depressed on the display. 2. An interface chip (IC) has failed in the upper PCA's keypad. 3. Liquid ...

Question about C956 Treadmill with Cardio Theater Option (Used)

1 Answer

...fix that Precor Error 30, 31, 32 and 33, Communications Error Probable Cause 1. Bad interconnect cable between upper PCA and lower PCA. 2. Interconnect cable is mistakenly plugged into the CSAFE ...

Question about EFX 546i Elliptical Version 4

1 Answer

...fix Precor EFX 5.17 error code 30 Precor Error 30, 31, 32 and 33, Communications Error Probable Cause 1. Bad interconnect cable between upper PCA and lower PCA. 2. Interconnect cable is mistakenly ...

Question about EFX 546i Elliptical Version 4

1 Answer

...fix problem and clear code out Precor Error 30, 31, 32 and 33, Communications Error Probable Cause 1. Bad interconnect cable between upper PCA and lower PCA. 2. Interconnect cable is mistakenly ...

fix it. God bless you Check power problems if the console on the elliptical machine does not light up. Make sure that the plug for the machine is secure in the outlet. If it is plugged in, ensure that

Question about Sole E20 Elliptical

1 Answer

...fix it? Precor Error 50, Too Much Brake (Magnet) Current Probable Cause 1. Shorted or damaged wiring between the lower PCA and the eddy current magnet is the most common cause for this error. 2. Bad ...

2 minutes then an error message - motor error - appears. Cam I fix this problem If you wish to get some details about treadmill repair ; visit the site linked here. Pull up older posts. http://electro

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sport & Outdoor - Others Experts

Tom Chichester

Level 3 Expert

61177 Answers

ray gallant

Level 3 Expert

71004 Answers

Bill Boyd

Level 3 Expert

53816 Answers

Are you a Sport & Outdoor - Others Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...