Questions & Answers for: Isuzu how to fit a gearbox

...settings depending witch gear it is in .One switch on gearbox is reversing lights and others if fitted are for

...with the new assembly. The assembly is not very expensive and when you have it fitted you will have 100,000 miles trouble free driving. To fit one piece at a time means 4 times to remove the

...gearbox with six forward gears. When driving 120Km/h, revs are about 3200/min, I would like to drop this to 1800 - 2000/min. Is this possible? How long should I allow the vehicle to idle before ...

...off the wearing if it has one, tap on the new wear ring ,fit the new seal and replace the gearbox . You maybe gotta jack up the back of the box to get the top bolts out , depends how handy you are

Problems fitting gearbox in Isuzu KB 280 DT save a lot of time and scrap it Remove the exhaust , reverse switch,and bake gearbox mounting ,lift the back end of the care and front to give room to slide

...gear up again?? please help rip it out and fit a manual gearbox is the best bet as i do feel that this gearbox has done its life and it needs a overhaul ,like front clutch relign and new brake ...

GEARBOX 1995 USUZU MU 3.1 DIESEL I replaced a clutch kit on a 1995 3.1 diesel turbo Isuzu MU. Refitted gearbox, bled clutch, clutch doesn't work. Pressure plate, disk, bearing fitted correctly. ...

I own an 2006 Isuzu KB 300 LX doublecab. It is fitted with a manual gearbox. The vehicle has clocked 316000km. The gearlever has excessive travel, what do I need to do to correct this. new plastic or ...

isuzu trooper 2004 model 4jx1 engine what was the fly wheel marks if it was at tdc if flywheel is fitted in correct position the timing mark on the front top cambelt gear is at 12 O clock and with ...

...gearbox with stick shift can I fit to this motor ? no motor stated ask your wrecking yard this. ask you trans shop this, not sure what column shift means, 3 on the tree (stick) 0r A./T column ...