...it wasnt getting enough air still nothing so then i checked the fuel rail. they put a quick connect fitting on the supply line i pulled the cap when the car was off and pushed the nipple in and no ...
...the body is very tight, and I did not have a socket to fit. I used an offset wrench (13mm or 1/2 inch) to remove the bolts. There may be more room if you take off the alternator & alternator
alternator belt for a 96 chevy cavelier go to http://www.mvreader.com/multiview/dayco/index.php?bgInterchange=1&l=n They have diagrams for the routing of the new belt.. As for actually doing it. 1
...alternator etc. is. It IS a TIGHT FIT underneath, but I couldn't get my arm between the block and the firewall at all from above to reach, much less see, much easier from underneath! one at a time if ...
...fit. I have also put the old alternator back on the car. Belt still too short. The belt came off the car so it should go back on. Anyone have a clue as to what I might be doing wrong? I'm using the ...
...fit the connections does not mean it is ready to go.Another point is that when you add electric equipment to your vehicle, always have a fuse in place. If you don't want to use an inline ...
...alternator from 2004 cavalier in a 2003 cavalier H Rob, If the engines are the same type and the mounting align you can. Make sure that the electrical connections fit and then go ahead. When ...
what year alternator will fit 2000 cavalier my alternator went and i have one from a 1998 will this fit my 2000? The alternator for the 2.2 engine fits 1996 - 2002 models.
... but you need to know which post they go to. An auto parts store with a replacement alternator that fits that car will be able to tell you which post will take the red wire and which one takes the ...
Usually answered in minutes!
1,849 Questions
1,641 Questions
1,529 Questions
1,438 Questions
1,339 Questions