Questions & Answers for: Subaru how to fit an alternator

FIT REPLACE ALL PART AND MAKE SURE TIMMING BELT IS NOT OUT OF SEQUENCE GOOD LUCK. Remove the rad with fan(s) Alternator belt, a/c belt if equipped. Then remove timing belt covers from the front of the

...if it is a twin spring design perhaps one is missing. Possible the wrong design of wiper blade is fitted and should be replaced by a blade with an aerofoil design. Replacing the belts to cure a ...

...Valve Grommet over the ball joint and press the arm into the grommet. This is now a perfect, snug fit. Wiper blades slamming into the car is a thing of the past. I couldn't find a new 'ball joint' ...

...maintenance I also think the differnt terms my be confusing me. you do have a timing belt fitted.And should be changed at manufactures recomendations. You do have a timing belt that should ...

hi there i have fitted a new hi there i have fitted a new alternator in my impreza as the battery wasnt charging but this alternator has made no difference (still only getting 12.2v) but what i ...

...fit. I was also warned that a battery drawing too much would kill my alternator. Where can I get an appropriate battery. Car has under 60K miles. Not fitting is the issue, not the Cold Cranking Amps. ...

...serpentine belt diagram for a 2006 subaru tribeca Diagram reference number 1 in the image below: "" Fitment: 2006 SUBARU B9 TRIBECA - 4 door Application Notes: Category: Electrical. Charging and ...

wheel interchange chart what other brands will fit You should have a wheel guide in the glove box or alternately on a door sill.