Questions & Answers for: fisher paykel washer wa37t26g

Fisher Paykel WA37T26G washing machine quit spinning, then later went dead. So I found and replaced the blown 6.3 amp fuse on the control board. After that, it seemed OK, even spun when empty. But ...

fisher and pykel always off balance( wont spin at all because of it)disconnect unbalance sensor? Try to raise your back feet on the washer, so that it tilts forword away from the unbalanced censer but

Fisher and Paykel, EcoSmart with lid lock. After initial fill, all wash lights go out, advances to rinse, then beeps continuously. Have to shut machine off and start over. Continues to wash, but leaks

...fisher and paykel washing machine model #WA37T26G and I noticed yesterday and today that the lights lit on the electronic board was 1,6,7,8...not sure if it was the same yesterday and not sure if it ...

Fisher Paykel WA37T26G doesn't spin as fast as should in rince and spin cycle Fisher Paykel model WA37T26G top load washer when it goes into the spin and rince cycle, the water sprays in and the ...

Fisher &Paykel washer will not rinse or spin. All lights are on. WA37T26G washer There are eight light I think. Are all of them lit?

fisher-paykel washer fills on final spin cycle Does your machine have a diverter valve, If it does the valve is stuck in recirculate mode. Lint has jammed it closed.

...Fisher & Paykel WA37T26GW2 washer and when I start the machine it continues to fill on and off while continuously draining, never allowing it to fill up enough to agitate. Please help sounds like ...

Fisher & Paykel Hi. I have the WL80T65CW1 Aquasmart washer. Unfortunately, it is showing error/fault code 250. Can you tell me what this means and how I can fix this problem? Much appreciated. You

Fisher and paykel eco smart washer model number WA37T6G error code 31? I ran a test on my washer and it came up with error code 31. I have only found error code 37 online. It will put water in when I ...