Questions & Answers for: Tally firmware

...not work. Please give me a good suggestion. fault "blk 0 chksum error" is attributable to a corrupt firmware. Fortunately the firmware can be reloaded and restore the printer in operating condition. ...

...None of the buttons do anything. The 'Boot' message indicates the printer has switched to the firmware download mode as it has not been able to load the firmware. This can happen because the ...

...T6454 IS GIVING BLACK ONE CHECKSUM ERROR I think the error you are getting is caused by corrupt firmware or damaged memory on the main board. As a first step I would recommend reloading the ...

...Header" message on the LCD display on the T2250 because the pritner is in "boot" mode, which is the firmware download mode and is detecting data being recived is not a correct firmware file. The most ...

...your needs, please try one of the following: Driver Description Version Windows 95 and 98 Driver - Firmware Version 5.2 or Later 3.51 Windows 95 and 98 Text Only Driver - Firmware Version 5.2 or ...

...other possible causes;Faulty / damaged ribbon cableFaulty main boardUpdate firmware, the error should change to a more meaningful error with later firmware lipi line prinyer ...

...the printer driver uses. B) If using the T6050 printer driver ensure you have the correct lavel of firmware. The later version of printer driver need to have the latest T6050 firmware installed in ...

...configure 1 step 1 : change the panel cable step 2 : change the control panel step 3 : download firmware as follows : T6306 FIRMWARE DOWNLOADING PROCEDURE Connect the printer to pc through ...

T6100 firmware update update firmware You have T61100 Printer firmware???

T6100 firmware where do I find a firmware update Send mail to [email protected] i wl send youT6100 Firmware