Questions & Answers for: Isuzu Rodeo fire codes

when accelerating at 40mph sometime i get a pop pop sound like its back firing. Sounds like it is a "lean" pop. Do you have any engine check lights on the dash ? Plug in an OBD II reader to find any ...

I have a 2001 rodeo ,the car has 40500 miles on it it started missing and one cylinder did not have fire, 300, code 352 code replaced cps and coil , ran well for a coulpe weeks the same code came up ...

misfire random Misfire code I'd replace plugs wires buy a used icm Basically this means that the the car's computer has detected that not all of the engine's cylinders are firing properly. A ...

What's your problem? random misfire Basically this means that the the car's computer has detected that not all of the engine's cylinders are firing properly.A P0300 diagnostic code ...

2004 Isuzu Rodeo S-3.5L/6VE1;Misfiring@#2-code:P0302 Swapped #2 and #4 plugs and coil assembly. Still getting #2 misfiring code. Also changed fuel filter for the heck of it. Added a couple of coil ...

my rodeo isuz 2000 eng v6 24 val is not firing rodeo Isuzu firing i need to know the problem HelloThe Engine and Automatic Transmission (not applicable to manual transmissions) in this vehicles drive ...

quit firing Bad crank angle sensor? Check for OBDII codes.

why not firing right bank on 2002 isuzu rodeo 3.2L most likely the coil pack , have the OBD codes read to confirm which sensors/switch(s) are at fault

1998 firing order isuza rodeo v6 2Answers spark plug firing order ...firing order of 123456. #1 being passenger's front cylinder and #2 being driver's front... what country? spark reasons or cam ...

i have a 1997 Isuzu Rodeo 2.6L cylinders 2 & 3 won't fire after vehicle starts but will fire if I unhook cylinder 1 or 4 what will cause this Misfire in 1997 Isuzu Rodeo 4x4 3.2L - YouTube ? 2:32 ...