Malfunction detected C-0096 The copier had this message on the screen this morning that it had detected a malfunction with code 0096 and need to call for service. The copier was used late yesterday ...
Question about FS-3900DN Laser Printer
need to do 2 jobs on a FS3830 n printer at the same time need to print a letter head / form at the same time as a file so as to get a finished Doc. can this be done???? No, after letterhead is ...
Finisher not connected The printer will not work because it does not recognize teh finisher. check the door that the staples go in that door has been known to "stick". make sure also the guides are ...
Kyocera KM 3035 copier display panel says: Kyocera KM 3035 display panel says: !Check Finisher 1. Set the eject tray I cannot clear this from the display panel. I tried simulation 20 and 906. No luck.
Kyocera KM 3035 display panel says: !Check Finisher 1. Set the eject tray I cannot clear this from the display panel. I tried simulation 20 and 906. No luck. I also cannot find anything physically ...
Kyocera KM-2530 printer displays "Attach Finisher." It was working until we moved it recently. Checked all cords and rebooted several times to no avail. Couldn't see any push rods or buttons that need
Question about Copystar CS-5035 Copier
Our Copystar CS-5035 Copier is not sending the copies to the finisher, instead they are coming out in the middle of the copier. Instead of the copies stacking in the finisher they are coming out in ...
machine says cover open but it is not open The machine is saying that the finisher cover is open but it is not. I turned the machine off and then on again and then it said the folding tray was open, ...
Question about TASKalfa 180 Copier
I have a Kyocera Taskalpha 3500 with finisher attached. I need to remove the finisher in order to move the machine to another room. How do I detach the finisher from the machine? Remove black cover at
...Error F375" message on a Kyocera Taskalfa 266ci copier/printer is indicating a problem with the finisher. Here are a few steps you can try to troubleshoot the problem: Check the finisher: Make ...
Usually answered in minutes!
223 Questions
192 Questions
168 Questions
156 Questions
143 Questions