Questions & Answers for: Honda VT 500 C Shadow final drive

how do i take the back wheel off Remove the bolts holding the hub to the shaft drive

1984 Honda Shadow VT700 Taillight/All other rear. 1984 Honda Shadow VT700 bike fell over in the drive way and now when i start the bike the oil pressure light comes on. check for a broken wire on the ...

Final Drive Breather Valve A question on the final drive hub unit. I accidentally snapped off the breather valve's cap (a small cup shaped piece that I imagine protects the valve from elements/water).

I have a 1984 Honda Shadow 500C. that when first starting in the morning, the starter just spins and doesn't engage anything. After several attempts it will finally start and then is fine all day long

...the proper intensity. Something is feeding the line juice between the brake light switches and the final connector to the tail light. Has anyone dealt with this before, or have any suggestions? I'm ...

1986 Honda VT 500 C Shadow starter spins engine will not turn over my 1986 vt500c has been having trouble starting. I replaced the solenoid relay, battery, and starter motor, the starter spins but ...

final drive. Place a pan under the final drive and a rag over the wheel. Open the small bolt on the bottom of the final drive and let it drain. Do not lose the sealing washer. When empty put the lower

...get an accurate oil level reading. You will use between 3.2 and 3.4 quarts. Your final drive uses 80/90 hypoid gear oil. Synthetic hypoid oil will reduce friction and make your final drive run

Vt500 tire rub Standard rear tire rubbing at drive . How to solve? Hi, Hans for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought

...shadow vt500c , when i am trying to throttle up thru the gear it hesitates and when i get to the final gear it will only get to 4000 rpm;s then it acts like its not getting enough fuel but