Questions & Answers for: Harley Davidson filter

Mobil 1 M1-102 Oil Filter for '04 Softail Standard Does anyone use (and recommend) this oil filter? Better yet, does it fit properly? According to the oil filter cross reference charts I've seen, the ...

OIL CHANGE, NOW ITS KNOCKIN 2003 1200 sport s: changed oil & filter, bike now making bad noises... i didnt fill filter,didnt think had to... 3 qts.20\50 harley oil & correct filter. HELP!!!!!!

I NEED TO KNOW WHERE MY FUEL FILTERS ARE LOCATED ON MY 03 SOFTAIL STANDARD Any "filters" are located in the tank. On a carb equipped model, the 'filter" is simply a strainer over the inlet of the ...

2003 FLHTCI OIL Filter Stuck, bike has oil cooler, the cooler moves but the oil filter won't budge. It's a K & N filter with nut on the end, I've tried all kind of wrenches still stuck. Now I have

at the oil filter what line is the return and which one is the feed On any oil filter, the oil should go INTO the filter from the outside edge and go OUT of the filter from the center. The reason is ...

I have an Arlen Ness Big ****** air filter on my 07 FLSTC, I cleaned the air filter, do I have to oil the air filter and if so what should I use? It is best to oil the filter on most of the after ...

...plug O-ring for cuts, tears or signs of deterioration. Replace as necessary. 5. Remove the oil filter as follows: a. Obtain the OIL FILTER WRENCH (HD-42311). The tool allows easy removal of the ...

i FOUND GAS DROPINGS UNDER THE AIR FILTER THEY ARE DARK MABY OILY NOT SURE IS IT EASY TO CHANGE THE AIR FILTER MY SELF ANY HELPFUL TIPS WOULD BE APREASHATED THANK YOU Sure, just take the cover off and

how to remove air filter on 2001 fxst Remove the screw and air cleaner cover, remove the three TORX screws and the bracket from the filter element, gently pull both rubber breather tubes from the back

how to check fuel filter on 2008 ultra classic If you need the instructions for removal of the top plate to get to the point of the following instructions post another request as it would be too long ...