...fault the washer. This is often, if not all the time, a faulty fill valve, the fill valve has mechanically stuck open and is not fully shutting off when not the washer is not in use. This normally ...
1E error code The IE fault code indicates that your washer is not filling properly with water.
error code 1E? Hi, The IE fault code indicates that your washer is not filling properly with water Thanks! mannu_rakesh After reveiwing the solution posted about the water not filling properly i ...
...fill solenoid fault or a line filter fault.You can check power to the fill solenoid or give it a couple of taps when its suppose to be filling to see if its just stuck. the inline filter could be ...
...a Kenmore elite washing machine. There appear a F20 code. What does it mean? If its trouble, how do I correct it? Thanks. its a water fill fault press power cancel twice this should reset the ...
Question about WD-1280FHD Front Load Washer
IE code was displayed once. washer will not stop filling or spinning, clock freezes one minute past start up for wash cycle and while washer fills fast and in less than 5 minutes the washer does not ...
Error code FE what to do Water keeps filling up in machine The FE error or fault code indicates that the washer is overfilling due to a defective water inlet valve. The valve is not repairable and ...
Question about WD-1280FHD Front Load Washer
My LG dishwasher when I turn it on it drains the water, then it fills it up with water, about 1 min. later gives me the code E1 and drains the water again... LG Dishwasher Displaying Fault Code ...
Question about WD-1280FHD Front Load Washer
...detects this as a fault. you can test this by removing the wire to the heater element, it will fill up with water then but when it comes to heating water it will shut of as a fault. and show a
Usually answered in minutes!
1,845 Questions
401 Questions
404 Questions
243 Questions
245 Questions